REAR PLANETARY GEAR > REASSEMBLY

1. INSTALL REAR PLANETARY RING GEAR FLANGE

2. INSTALL REAR PLANETARY FLANGE THRUST NEEDLE ROLLER BEARING

3. INSTALL NO. 1 PLANETARY CARRIER THRUST WASHER

4. INSTALL NO. 2 PLANETARY CARRIER THRUST WASHER

5. INSTALL NO. 2 ONE-WAY CLUTCH

6. INSPECT NO. 2 ONE-WAY CLUTCH

7. INSTALL REAR PLANETARY RING GEAR

8. INSTALL PLANETARY OUTPUT SHAFT OIL SEAL RING

9. INSTALL OUTPUT SHAFT