TRANSMISSION CONTROL CABLE > REPLACEMENT

1. REMOVE TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY

2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

4. REMOVE CONSOLE BOX ASSEMBLY

5. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

6. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

7. ADJUST SHIFT LEVER POSITION

8. INSPECT SHIFT LEVER POSITION

9. INSTALL CONSOLE BOX ASSEMBLY

10. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

11. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

12. INSTALL TRANSFER SHIFT LEVER KNOB SUB-ASSEMBLY