PARKING BRAKE CABLE (for 4WD) > INSTALLATION

1. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY

2. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY

3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

4. CHECK REAR BRAKE DRUM INSTALLATION

5. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY AND NEW GASKET

6. ADJUST BRAKE SHOE CLEARANCE.

7. INSTALL REAR WHEEL

8. CHECK PARKING BRAKE LEVER TRAVEL

9. ADJUST PARKING BRAKE LEVER TRAVEL

10. ADJUST PARKING BRAKE TURN BUCKLE

11. INSTALL CONSOLE BOX ASSEMBLY

12. INSTALL UPPER CONSOLE PANEL SUB-ASEMBLY

13. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

16. PERFORM INITIALIZATION