DTC    P0110/24    Intake Air Temperature Circuit

DESCRIPTION

MONITOR DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

When using intelligent tester:

READ OUTPUT DTC

READ DATA LIST (INTAKE AIR TEMPERATURE)

READ DATA LIST (CHECK FOR OPEN IN WIRE HARNESS)

READ DATA LIST (CHECK FOR OPEN IN ECM)

READ DATA LIST (CHECK FOR SHORT IN WIRE HARNESS)

READ DATA LIST (CHECK FOR SHORT IN ECM)

When not using intelligent tester:

CHECK ECM (THA VOLTAGE)

INSPECT INTAKE AIR TEMPERATURE SENSOR (MASS AIR FLOW METER)

CHECK WIRE HARNESS (ECM - MAF METER)