INSTRUMENT PANEL SAFETY PAD > REMOVAL

1. TABLE OF BOLT, SCREW AND NUT

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

4. REMOVE STEERING PAD ASSEMBLY

5. REMOVE STEERING WHEEL ASSEMBLY

6. REMOVE STEERING COLUMN COVER LOWER

7. REMOVE STEERING COLUMN COVER UPPER

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL

9. REMOVE COMBINATION METER ASSEMBLY

10. REMOVE HEATER CONTROL KNOB

11. REMOVE FRE/REC CONTROL KNOB

12. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER

13. REMOVE AIR CONDITIONING CONTROL ASSEMBLY

14. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio)

15. REMOVE RADIO TUNER OPENING COVER WITH BRACKET

16. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

17. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY (w/ Airbag System)

18. REMOVE INSTRUMENT PANEL DOOR (w/o Airbag System)

19. REMOVE FRONT PILLAR GARNISH LH (See page)

20. REMOVE FRONT PILLAR GARNISH RH

21. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY UPPER