The alphabet mark beside the clips in the figure indicates the colors of the clips.
The clips with the same shape may have different engaging forces depending on their colors. Always use the specified parts when installing.
The alphabets of color codes are used in the wiring diagram.
|
Color code |
Collar |
Color code |
Collar |
Color code |
Collar |
|
B |
Black |
R |
Red |
Br |
Brown |
|
G |
Green |
V |
Violet |
Gr |
Gray |
|
L |
Blue |
W |
White |
Lg |
Light green |
|
Or |
Orange |
Y |
Yellow |
Sb |
Light blue |
|
P |
Pink |
Be |
Beige |
|
|
|
(1) |
Under cover front |
Tightening torque: N·m (kgf-m, ft-lb) |
|||
|
T: |
18 (1.8, 13.3) |
||||
|
(1) |
Mud guard front RH |
(4) |
Plate air flap front LH |
(7) |
Mud guard rear LH |
|
(2) |
Plate air flap front RH |
(5) |
Mud guard rear RH |
(8) |
Plate air flap rear LH |
|
(3) |
Mud guard front LH |
(6) |
Plate air flap rear RH |
|
(1) |
Under cover rear RH |
(3) |
Under cover rear LH |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Protector tank RH |
(4) |
Protector tank LH |
T1: |
7.5 (0.8, 5.5) |
|
T2: |
18 (1.8, 13.3) |
||||
For detailed exploded view of the fuel tank protector, refer to “Fuel Tank” in “FUEL INJECTION” section.
|
(1) |
Grille ASSY front LWR |
(9) |
Light ASSY fog LH (other than LED type) |
(17) |
Energy absorber foam front |
|
(2) |
Bumper face front |
(10) |
Light ASSY fog LH (LED type) |
(18) |
Bracket grille front |
|
(3) |
Cover hook front |
(11) |
Bracket active grille shutter Front |
(19) |
Beam COMPL front |
|
(4) |
Bumper guard front |
(12) |
Active grille shutter |
(20) |
Air guide LH |
|
(5) |
Cover fog front LH (Type A model) |
(13) |
Stay bumper LWR side LH |
||
|
(6) |
Cover fog front LH (Type B model) |
(14) |
Stay bumper LWR center LH |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(7) |
Cover fog front LH (Type C model) |
(15) |
Bracket side front LH |
T1: |
7.5 (0.8, 5.5) |
|
(8) |
Cover bumper cap |
(16) |
Bracket corner front LH |
T2: |
32 (3.3, 23.6) |
|
(1) |
Ornament front |
(3) |
Bracket grille UPR |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Grille ASSY front UPR |
(4) |
Panel COMPL front hood |
T: |
4.5 (0.5, 3.3) |
|
(1) |
Bumper beam COMPL rear |
(7) |
Bumper face rear |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Cover side LWR LH |
(8) |
Reflex reflector LH |
T1: |
7.5 (0.8, 5.5) |
|
(3) |
Bracket side rear LH |
(9) |
Cover bumper rear |
T2: |
70 (7.1, 51.6) |
|
(4) |
Bracket corner rear LH |
(10) |
Bumper guard rear |
||
|
(5) |
Grille air ventilation LH |
(11) |
Cover hook rear |
||
|
(6) |
Cover side LWR RH |
(12) |
Reflex reflector RH |
||
Wiper model without nozzle
|
(1) |
Cowl panel side RH |
(4) |
Cover joint |
(7) |
Hose windshield washer |
|
(2) |
Cowl panel |
(5) |
Cover cowl panel |
(8) |
Protector cowl panel |
|
(3) |
Cowl panel side LH |
(6) |
Nozzle windshield washer |
(9) |
Seal cowl panel |
Wiper model with nozzle
|
(1) |
Cowl panel side RH |
(5) |
Cover cowl panel |
(9) |
Protector cowl panel |
|
(2) |
Cowl panel |
(6) |
Joint washer hose |
(10) |
Seal cowl panel |
|
(3) |
Cowl panel side LH |
(7) |
Nozzle windshield washer |
||
|
(4) |
Cover joint |
(8) |
Hose windshield washer |
|
(1) |
Cap lid |
(5) |
Fastener |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Molding roof RH |
(6) |
Self-locking nut |
T: |
7.5 (0.8, 5.5) |
|
(3) |
Rivet |
(7) |
Molding roof LH |
||
|
(4) |
Carrier BRKT |
||||
Type A
|
(1) |
Roof rail ASSY RH |
(8) |
Rivet |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Seal washer |
(9) |
Fastener |
T: |
7.5 (0.8, 5.5) |
|
(3) |
Protector front RH |
(10) |
Roof rail ASSY LH |
||
|
(4) |
Protector center RH |
(11) |
Protector front LH |
||
|
(5) |
Protector rear RH |
(12) |
Protector center LH |
||
|
(6) |
Self-locking nut |
(13) |
Protector rear LH |
||
|
(7) |
Molding roof RH |
(14) |
Molding roof LH |
||
Type B
|
(1) |
Roof rail ASSY RH |
(8) |
Rivet |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Seal washer |
(9) |
Fastener |
T: |
7.5 (0.8, 5.5) |
|
(3) |
Protector front RH |
(10) |
Roof rail ASSY LH |
||
|
(4) |
Protector center RH |
(11) |
Protector front LH |
||
|
(5) |
Protector rear RH |
(12) |
Protector center LH |
||
|
(6) |
Self-locking nut |
(13) |
Protector rear LH |
||
|
(7) |
Molding roof RH |
(14) |
Molding roof LH |
||
|
(1) |
Garnish ASSY fender LH |
(4) |
Garnish ASSY front door LH (Type B) |
(7) |
Garnish ASSY rear quarter |
|
(2) |
Garnish ASSY front door LH (Type A) |
(5) |
Garnish ASSY rear door LH (Type B) |
(8) |
Garnish ASSY side sill |
|
(3) |
Garnish ASSY rear door LH (Type A) |
(6) |
Garnish ASSY rear door UPR |
Type A
|
(1) |
Garnish bracket side LH |
(6) |
Garnish ASSY rear gate |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Opener switch (model with lock/unlock button)/opener switch (model without lock/unlock button) |
(7) |
Camera cover |
T: |
4.5 (0.5, 3.3) |
|
(3) |
Bracket |
(8) |
Protector |
||
|
(4) |
Garnish bracket side RH |
(9) |
Garnish ASSY rear gate LWR |
||
|
(5) |
Protector UPR |
(10) |
Ornament rear |
||
Type B
|
(1) |
Garnish bracket side LH |
(6) |
Garnish ASSY rear gate |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Opener switch (model with lock/unlock button)/opener switch (model without lock/unlock button) |
(7) |
Camera cover |
T: |
4.5 (0.5, 3.3) |
|
(3) |
Bracket |
(8) |
Protector |
||
|
(4) |
Garnish bracket side RH |
(9) |
Garnish ASSY rear gate LWR |
||
|
(5) |
Protector UPR |
(10) |
Ornament rear |
||
Type A
|
(1) |
Spoiler ASSY roof CTR |
(3) |
Spoiler ASSY roof side RH |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Spoiler ASSY roof side LH |
(4) |
Stop light ASSY high-mounted |
T1: |
4.5 (0.5, 3.3) |
|
T2: |
7.5 (0.8, 5.5) |
||||
Type B
|
(1) |
Spoiler ASSY roof CTR |
(3) |
Spoiler ASSY roof side RH |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Spoiler ASSY roof side LH |
(4) |
Stop light ASSY high-mounted |
T1: |
4.5 (0.5, 3.3) |
|
T2: |
7.5 (0.8, 5.5) |
||||
|
(1) |
Weather strip front door INN |
(5) |
Switch ASSY power window SUB front |
(9) |
Trim panel rear door |
|
(2) |
Trim panel front door |
(6) |
Switch ASSY power window MAIN front |
(10) |
Switch ASSY power window SUB rear |
|
(3) |
Light ASSY door step |
(7) |
Remote ASSY door |
(11) |
Weather strip rear door INN |
|
(4) |
Seat position memory switch ASSY |
(8) |
Cap remote |
(12) |
Cover gusset |
|
(1) |
Cover ASSY front |
(13) |
Cover rear seat heater RH |
(25) |
Cord ASSY power |
|
(2) |
Bracket console COMPL |
(14) |
Switch ASSY rear seat heater RH |
(26) |
Cord ASSY rear seat heater |
|
(3) |
Cap console RH |
(15) |
AUX unit rear |
(27) |
Duct console rear |
|
(4) |
Console box LWR RH |
(16) |
AUX cap |
(28) |
Tape (model with rear seat heater) |
|
(5) |
Switch cap |
(17) |
Lid ASSY console |
(29) |
Grille ASSY console rear |
|
(6) |
Switch ASSY hand brake |
(18) |
Tray ASSY console |
(30) |
Cover rear console ASSY |
|
(7) |
Tray |
(19) |
Mat console box |
(31) |
Pocket console rear |
|
(8) |
X mode switch |
(20) |
Cord ASSY console |
(32) |
Panel switch console |
|
(9) |
Switch ASSY front seat heater |
(21) |
Pocket console |
||
|
(10) |
Cap (model without front seat heater) |
(22) |
Duct console center |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(11) |
Socket ASSY |
(23) |
Cup holder |
T1: |
6.5 (0.7, 4.8) |
|
(12) |
Cup holder cover front |
(24) |
Mat cover front |
T2: |
18 (1.8, 13.3) |
|
(1) |
Grille speaker side LH |
(10) |
Switch ASSY instrument panel |
(19) |
Tray center UPR |
|
(2) |
Grille front defroster |
(11) |
Ornament panel ASSY driver |
(20) |
AUX unit front |
|
(3) |
Sunload sensor |
(12) |
Cover starter switch (model without push button ignition starter) |
(21) |
Socket ASSY |
|
(4) |
Grille speaker side RH |
(13) |
Panel starter switch (model with push button ignition starter) |
(22) |
Light pocket |
|
(5) |
Panel COMPL instrument |
(14) |
Switch ASSY starter (model with push button ignition starter) |
(23) |
Ornament panel console COMPL LH |
|
(6) |
Cover ASSY instrument panel side LH |
(15) |
Mat center tray |
(24) |
Cover center side LH |
|
(7) |
Cover ASSY instrument panel side RH |
(16) |
Tray center LWR |
(25) |
Cover center side RH |
|
(8) |
Cover LWR driver |
(17) |
Ornament ASSY passenger |
(26) |
Ornament panel console COMPL RH |
|
(9) |
Fuse box front lid |
(18) |
Duct console front |
|
(1) |
Grille defroster side LH |
(5) |
Combination meter ASSY |
(9) |
Switch ASSY meter |
|
(2) |
Panel COMPL instrument |
(6) |
Grille ventilation ASSY center LH |
(10) |
Visor ASSY |
|
(3) |
Grille defroster side RH |
(7) |
Grille ventilation ASSY center RH |
(11) |
Cover steering UPR |
|
(4) |
Grille ventilation side LH |
(8) |
Grille ventilation side RH |
|
(1) |
Driver monitoring unit |
(9) |
Antenna ASSY telematics |
(16) |
Panel center UPR |
|
(2) |
Panel display UPR (model with driver monitoring unit) |
(10) |
GPS antenna ASSY |
(17) |
Heater control ASSY |
|
(3) |
Panel display LWR (model with driver monitoring unit) |
(11) |
Reinforcement meter |
(18) |
Panel ASSY heater |
|
(4) |
Panel display UPR (model without driver monitoring unit) |
(12) |
Bracket audio LH |
(19) |
Backup unit ASSY |
|
(5) |
Panel display LWR (model without driver monitoring unit) |
(13) |
Audio ASSY |
||
|
(6) |
Multi-function display |
(14) |
Bracket audio RH |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(7) |
Panel COMPL instrument |
(15) |
Cover center UPR |
T: |
7.5 (0.8, 5.5) |
|
(8) |
Keyless access CM |
||||
|
(1) |
Panel COMPL instrument |
(5) |
Pocket COMPL |
(9) |
Light pocket cover |
|
(2) |
Under cover ASSY passenger |
(6) |
Cushion pocket |
(10) |
Light pocket |
|
(3) |
Reinforcement passenger |
(7) |
Damper ASSY |
||
|
(4) |
Panel instrument passenger |
(8) |
Key cylinder ASSY |
|
(1) |
Beam steering COMPL |
(7) |
Reinforcement CTR LWR |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
TORX® bolt (M8 × 57) |
(8) |
Panel COMPL instrument |
T1: |
7.5 (0.8, 5.5) |
|
(3) |
Cap bolt |
(9) |
TORX® bolt (M8 × 37) |
T2: |
25 (2.5, 18.4) |
|
(4) |
Adjuster clip space |
(10) |
Passenger’s airbag module ASSY |
||
|
(5) |
Knee airbag module ASSY |
(11) |
Center bracket UPR |
||
|
(6) |
Cushion |
||||
|
(1) |
Nozzle front defroster ASSY |
(4) |
Duct center ventilation front |
(7) |
Duct grille ventilation CTR RH |
|
(2) |
Duct side defroster LH |
(5) |
Duct grille ventilation CTR LH |
(8) |
Duct side ventilation RH |
|
(3) |
Duct side ventilation LH |
(6) |
Panel COMPL instrument |
(9) |
Duct side defroster RH |
|
(1) |
Tether clip |
(8) |
Cover catcher |
(15) |
Remote control back rest switch |
|
(2) |
Trim panel ASSY A pillar |
(9) |
Trim panel ASSY C pillar |
(16) |
Socket ASSY |
|
(3) |
Cover side sill front FT RH |
(10) |
Cover belt |
||
|
(4) |
Cover side sill front RR RH |
(11) |
Trim panel ASSY rear pillar UPR |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(5) |
Trim panel ASSY B pillar LWR |
(12) |
Trim panel ASSY apron |
T: |
7.5 (0.8, 5.5) |
|
(6) |
Trim panel ASSY B pillar UPR |
(13) |
Luggage hook |
||
|
(7) |
Cover side sill rear UPR |
(14) |
Cover lid |
||
|
∗: 6 pieces on the LH side For model without sub woofer, 6 pieces on the RH side; for model with sub woofer, 5 pieces on the RH side |
|||||
|
(1) |
Spacer rear floor front |
(5) |
Cover trunk |
(9) |
Mat rear floor side LH |
|
(2) |
Board rear floor front RH |
(6) |
Spacer rear floor side LH |
(10) |
Cover rear floor edge ASSY |
|
(3) |
Board rear floor front LH |
(7) |
Mat rear floor side RH |
||
|
(4) |
Spacer rear floor side RH |
(8) |
Mat floor CTR |
|
(1) |
Trim panel ASSY rear gate side RH |
(5) |
Trim panel rear gate handle |
(9) |
Cap rear gate LH |
|
(2) |
Trim panel ASSY rear gate LWR |
(6) |
Light ASSY rear gate |
(10) |
Trim panel ASSY rear gate UPR |
|
(3) |
Cap rear gate RH |
(7) |
Cap rear gate LWR |
(11) |
Trim panel ASSY rear gate side LH |
|
(4) |
Luggage hook |
(8) |
Power rear gate inner switch ASSY |
For the detailed exploded view for power rear
gate inner switch assembly, refer to “Module & Rear Gate” in “POWER
REAR GATE SYSTEM” section.
POWER REAR GATE SYSTEM>General Description>COMPONENT
|
(A) |
Model with sunroof |
(B) |
Models without EyeSight |
(C) |
Model without sunroof |
|
|
|||||
|
(1) |
Trim panel sub ASSY (model with sunroof) |
(3) |
Holder cover ELR |
(5) |
Garnish sunroof |
|
(2) |
Holder |
(4) |
Cap belt roof |
(6) |
Trim panel sub ASSY (model without sunroof) |
|
(1) |
Sun visor ASSY RH |
(4) |
Mirror ASSY rearview inner |
(6) |
Hook sun visor |
|
(2) |
Cap sun visor |
(5) |
Sun visor ASSY LH |
(7) |
Assist grip |
|
(3) |
Base inner mirror |
For exploded view of the inner mirror, refer to “Rearview Mirror” in “GLASS/WINDOWS/MIRRORS” section.
GLASS/WINDOWS/MIRRORS>General Description>COMPONENT > REAR VIEW MIRROR
|
(1) |
Insulator toe board |
(4) |
Foot pad (resin type) |
Tightening torque: N·m (kgf-m, ft-lb) |
|
|
(2) |
Plate footrest |
(5) |
Insulator tunnel |
T: |
7.5 (0.8, 5.5) |
|
(3) |
Floor mat |
(6) |
Accelerator plate |
||