|
1.
| caution |
Do not heat than necessary.
|
Immerse the refrigerant temperature sensor probe into engine oil to heat the sensor probe.
|
|
2.If the oil temperature reaches the standard value, there should be continuity between the switch terminals.
|
|
Switch status
|
Operating temperature °C
|
Being turned on (2Ω or less)
|
Less than 100
|
Being turned off (No continuity)
|
130 or more
|
|
| note |
When the oil temperature is 130°C or more and there is no continuity, the resistance will not be 2Ω or lower until the oil temperature reduces to 100 °C or less.
|
|
)
)