TROUBLE SYMPTOM CHART



caution If the trouble is not resolved by following the diagnosis procedure, a variant code memorised in the ECU may be incorrect. Check the variant code.

Symptom
Inspection procedure number
Reference page
When the ignition switch is at the "LOCK" (OFF) position, the functions do not work normally.
A-1

Check the battery power supply circuit to the ETACS-ECU.

<FUNCTION SYSTEM>


Symptom
Inspection procedure number
Reference page
Buzzer
Lamp reminder buzzer function does not work normally.
B-1

Turn-signal lamp operation sound function does not work normally.
B-2

Seat belt reminder function does not work normally.
B-3

Windshield wiper/washer
The windshield wipers do not work at all.
C-1

The windshield wipers do not work normally.
C-2

The windshield wipers do not stop at the specified park position.
C-3

The intermittent wiper interval cannot be adjusted by operating the windshield intermittent wiper volume control.
C-4

The intermittent wiper interval is not changed according to the vehicle speed.
C-5

The windshield washer does not work normally.
C-6

The windshield wipers compatible with the rain light sensor do not operate normally.
C-7

Rear wiper/washer
The rear wiper does not work at all. <COLT>
D-1

The rear wiper does not work at all. <COLT CZ3>

The rear wiper does not stop at the specified park position. <COLT>
D-2

The rear wiper does not stop at the specified park position. <COLT CZ3>

The rear washer does not work.
D-3

Headlamp and tail lamp
The tail lamps do not illuminate normally.
F-1

The low-beam headlamps do not illuminate normally.
F-2

The high-beam headlamps do not illuminate normally.
F-3

The high-beam and low-beam headlamps do not illuminate when the passing switch is operated.
F-4

One of tail lamps, position lamps or licence plate lamp does not illuminate. <COLT>
F-5

One of tail lamps, position lamps or licence plate lamp does not illuminate. <COLT CZ3>

The headlamp(s) do not illuminate.
F-6

The high-beam indicator does not illuminate.
F-7

The daytime running lamp does not work normally (vehicles with daytime running lamp).
F-8

The headlamps (low-beam) and tail lamps illuminate regardless of the lighting switch positions. (High-beam does not Illuminate)
F-9

Auto lamp function does not work normally.
F-10

The coming home light does not work normally.
F-11

Flasher timer
The turn-signal lamps do not illuminate.
G-1

One of the turn-signal lamps does not illuminate.
G-2

The turn-signal lamp indicator does not illuminate.
G-3

The comfort flashing function does not work normally.
G-4

The hazard warning lamps do not illuminate.
G-5

The ESS (Emergency Stop signal System) function does not work normally.
G-6

Fog lamp
The front fog lamps do not illuminate normally.
H-1

The rear fog lamp do not illuminate normally. <COLT>
H-2

The rear fog lamp do not illuminate normally. <COLT CZ3>

One of the front fog lamps does not illuminate.
H-3

The front fog lamp indicator does not illuminate normally.
H-4

The rear fog lamp indicator does not illuminate normally.
H-5

Only specific function(s) works (fail-safe state).
I-1