Inspection Procedure 17: CD Sound Skips.

DIAGNOSIS PROCEDURE

STEP 1. Check the state in which the sound on the CD jumps.

Q. Does the sound jump when the car is parked?

STEP 2. Check the surface of the CD.

Q. Are there any scratches or soiling on the CD?

STEP 3. Check when replacing with a CD that can be played normally without any scratches or soiling.

Q. Does the radio with CD play normally when replaced with a CD that is not scratched or dirty and can play normally?

STEP 4. Check by tapping the radio with CD player and radio assembly.

Q. Does the sound jump when tapping the radio with CD player assembly?

Either repair or replace the radio with CD player assembly. (Take the following measures if a servicing shop is closely).


1. Investigate in detail the state when the sound jumps while driving the car.
   
2. Describe the state to the service shop for consultation.
   
3. Either repair or replace the radio with CD player assembly according to the instructions of the service shop.
   
Check that a CD sound skip is resolved.