REPLACE THE BULB

HEADLAMP BULB REPLACEMENT

caution

Do not touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, immediately clean it with alcohol or thinner. After drying completely, install the bulb.

1.Twist the socket cover to remove.

2.Disconnect the connector.
3.Remove bulb mounting spring to pull out bulb.

POSITION LAMP BULB REPLACEMENT

1.Twist the socket cover to remove.

2.Pull out the bulb socket.
3.Remove the bulb from the bulb socket.

FRONT TURN-SIGNAL LAMP BULB REPLACEMENT

1.Twist the bulb holder to remove.
2.Remove the bulb from the bulb holder by twisting it.