|
|
If the window glass automatically starts moving downwards at the wrong time while it is being raised, carry out the following adjustment or replacement procedures.
|
|
|
1.Remove the door trim assembly. (Refer to GROUP 52A, Door trim  ).
|
|
|
2.Remove the waterproof film. (Refer to ).
|
|
|
3.Remove the window regulator assembly from the door window glass, and then raise and lower the door window glass by hand to check the operation force.
| note |
Insert a cushion or similar object to prevent damage to the glass if it should happen to fall down.
|
|
|
4.If the door window glass does not move up and down smoothly, check or repair the following points.
- Check the installation condition of the runchannel.
- Repair any twisting in the door sash.
5.If repair or adjustment is not possible, replace the door assembly.
|
)