)
Standard value: 34 N or less
Fluctuation allowance: 20 N or less
5.If not within the specification, inspect and adjust the steering system components.
| 1.Verify that the tyre pressure is within the specification. Use tyres with more than
80% of the tread height remained. |
| 2.Place the vehicle on a level surface and turn the steering wheel to the straight-ahead position. |
| 3.Start the engine, and maintain the engine speed at 1000 ± 100 r/min. |
|
4.Attach the spring scale to the circumference of the steering wheel and measure the steering
force when the steering wheel is turned to left and right from the straight-ahead position within
90 °. At the same time, verify that the steering force does not vary excessively in
both directions. Standard value: 34 N or less Fluctuation allowance: 20 N or less 5.If not within the specification, inspect and adjust the steering system components. |