ACTUATORS

ABS WARNING LAMP, BRAKE WARNING LAMP

The ABS system informs the driver to the ABS system status by illuminating, extinguishing, or flashing the ABS warning lamp and brake warning lamp as follows.

ABS warning lamp and brake warning lamp illumination or flashing pattern

State		ABS warning lamp	Brake warning lamp
Normal	Correct	-	-
Faulty	ABS failure	Illuminates	-
Faulty	EBD failure	Illuminates	Illuminates
When M.U.T.-III is connected	Actuator not operated	-	-
	Actuator operated	Flash (2Hz)	-
	After the actuator is activated forcibly ^*	Illuminates^*	Illuminates^*

note

^*: The ABS warning lamp and the brake warning lamp stay on until the ignition switch is turned to the LOCK (OFF) position.
When the brake fluid level in the brake fluid reservoir tank is lower than the specified value, or when the parking brake lever is pulled, the brake warning lamp turns ON.