REAR WHEEL ALIGNMENT CHECK AND ADJUSTMENT


Measure wheel alignment with an alignment equipment on level earth.
The rear suspension, wheels, and tyres should be serviced to the normal condition prior to wheel alignment measurement.

TOE-IN

STANDARD VALUE:
Item
 Standard suspension
 High-ground suspension
At the centre of tyre tread
 3.0 ± 3.5 mm
 2.5 ± 3.5 mm

CAMBER
Standard value: -1°00’ ± 0°45’
note Difference between right and left wheels must be 0°30’ or less.

note
  • For vehicles with aluminium wheel, we recommend that a compensator be used to measure the camber and caster.
  • The camber is pre-adjusted at factory and is not adjustable.