)
2.Check that the oil level is with in 0 - 5 mm from the lower edge of the filler plug hole.
3.Check that the oil is not noticeably dirty.
4.Tighten the filler plug to the specified torque.
Tightening torque: 43 ± 3 N·m
|
1.Remove the filler plug. 2.Check that the oil level is with in 0 - 5 mm from the lower edge of the filler plug hole. 3.Check that the oil is not noticeably dirty. 4.Tighten the filler plug to the specified torque. Tightening torque: 43 ± 3 N·m |