DTC PROCEDURE


DTC(incremental sensor failure) P1860, P1861, P1862, P1865, P1866, or P1867 was output:


Conditions
 Procedure
MIL lamp on.
 Change shift actuator.
Mechanical problems, vehicle break down, etc.
 Change transmission.

DTC (correlation failure) P1817 or P1822 was output, and additional:


Conditions
 Procedure
DTC (actuator check failure) P1850, P1855 or P1908.
 Change transmission.
DTC (min. max. failure potentiometer) P1870, P1871,P1875 or P1876.
 Change potentiometer.
DTC (general potentiometer/correlation failure)
P1872, P1873, P1877 or P1878
 MIL lamp on.
 Change shift actuator and potentiometer.
Mechanical problems, vehicle break down, etc.
 Change transmission.