CLUTCH BLEEDING


caution
  • Use the specified brake fluid. Do not mix brake fluids. Specified fluid: Brake fluid DOT 4 +
  • Tighten the bleeder screw to the specified torque, otherwise the release cylinder may be broken. Specified torque: 5.5 ± 0.5 N·m

1.Connect a hose with a bottle to the bleeder screw.
2.Open the bleed nipple.
3.Depress the clutch pedal slowly. Open the bleeder screw to let air and brake fluid out. Close the bleeder screw. Release the clutch pedal. Repeat until only brake fluid and no air comes out.
4.Check that the brake fluid reservoir level stays between "MAX" and intermediate position of "MAX" and "MIN" marks throughout the clutch bleeding process.