Inspection Procedure 23: Run On (Dieseling)

COMMENT ON TROUBLE SYMPTOM

Failure is possibly caused by leakage from injector.

PROBABLE CAUSES

Failed injector
Failed engine-ECU or engine-A-M/T-ECU

DIAGNOSIS PROCEDURE

STEP 1. Check injector for spray condition.

Check each injector for spray condition (Refer to ).

Q. Does trouble symptom persist?

	Replace the engine-ECU or engine-A-M/T-ECU then perform the variant coding (Refer to GROUP 00 - Precautions Before Service - How to Perform Variant Coding ).

	Replace the injector.