AUTO STOP & GO (AS&G) OFF SWITCH CHECK <Vehicles with AS&G system>

1.Remove the AS&G OFF switch. 2.Connect the tester with the terminal No. 1 and No. 2 of the connector at the AS&G OFF switch. 3.Check the continuity status when the AS&G OFF switch is pressed and when the switch is released. Normal condition: Tester Connection Terminal When the AS&G OFF switch is released (Not being operated) When the AS&G OFF switch is pressed 1 - 2 No continuity Continuity (2 Ω or less) 4.If the tester is not changed, replace the AS&G OFF switch.