)
2.Measure resistance between terminal No. 2 (main power supply) and No. 4 (main earth) of the sensor connector.
Standard value: 1.1 - 2.4 kΩ (at 20°C)
3.Measure resistance between terminal No. 1 (sub power supply) and terminal No. 5 (sub earth) of the sensor connector
Standard value: 0.8 - 1.7 kΩ (at 20°C)
4.Measure resistance between terminal No. 2 (main power supply) and No. 3 (main output) as well as between terminal No. 1 (sub power supply) and No. 6 (sub output) of the sensor connector.
Normal condition:
| Depress the accelerator pedal slowly. |
Resistance value changes in accordance with the accelerator pedal
depression smoothly. |