SPECIAL TOOLS

Tool	Number	Name	Use
	MB992080 a: MB992081 b: MB992082	Belt tension meter set a: Belt tension meter b: Microphone assembly	Alternator and others belt tension check
	MB991955 a: MB991824 b: MB991827 c: MB991910 d: MB991911 e: MB991825 f: MB991826	M.U.T.-III sub assembly a: Vehicle communication interface (V. C. I.) b: M.U.T.-III USB cable c: M.U.T.-III main harness A (Vehicles with CAN communication system) d: M.U.T.-III main harness B (Vehicles without CAN communication system) e: M.U.T.-III adapter harness f: M.U.T.-III trigger harness	caution For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly. Checking the ignition timing Checking the idle speed
	MB991992	Torque wrench adaptor	Removal and installation of V.V.T. sprocket assembly mounting bolt
	MD998727	Oil pan FIPG cutter	Engine oil pan removal
	MD998781	Flywheel stopper	Supporting the flywheel assembly
	MB992207	Oil seal guide	Crankshaft rear oil seal case assembly installation <135>
	MB991993	Crankshaft front oil seal guide	Crankshaft front oil seal installation
	MB990699	Differential oil seal installer
	MB991454	Engine hanger balancer	Supporting the engine and transmission assembly note Special tool MB991454 is a part of engine hanger attachment set MB991453.
	MB991527	Hanger
	MB991895	Engine hanger	When the engine hanger is used: Supporting the engine assembly during removal and installation of the timing chain case assembly or transmission assembly
	MB991928 a: MB991929 b: MB991930 c: MB991931 d: MB991932 e: MB991933 f: MB991934	Engine hanger a: Joint (50) × 2 b: Joint (90) × 2 c: Joint (140) × 2 d: Foot (standard) × 4 e: Foot (short) × 2 f: Chain and hook assembly
	MB992000	Crankshaft adapter	Cranking of the engine after the crankshaft pulley removal