|
|
Measure wheel alignment with an alignment equipment on level
earth.
|
|
|
The rear suspension, wheels, and tyres should be serviced to the normal condition prior
to wheel alignment measurement.
|
|
|
STANDARD VALUE:
Item
|
Standard suspension
|
High-ground suspension
|
At the centre of tyre tread
|
3.0 ± 3.5 mm
|
2.5 ± 3.5 mm
|
|
|
|
Standard value: -1°00’ ± 0°45’ (Left/right
deviation within 30’)
|
|
| note |
- For vehicles with aluminium wheel, we recommend that a compensator be used to measure
the camber and caster.
- The camber is pre-adjusted at factory and is not adjustable.
|
|
)