#############################

Kevin Valentine
-interface: Multiplex Engineering T16-002
----------
-car:1999 Ford Ranger
-pins on OBD plug: ???
-protocol: SAE-J1850(PWM)
-freediag version: v0.3
-result: "fails to detect VPW, PWM, and then searches forever on the third one"
----------
-car: 2000 Toyota Echo
-pins on OBD plug: ???
-protocol: SAE-J1850(PWM)
-freediag version: v0.3
-result: ???

#############################

Colin Helliwell
-interface: Andy Whittaker
----------
-car: Alfa
-pins on OBD plug: 3,4,5,7,8,9,11,16.
-protocol: KWP2000 (almost)
-freediag version:
-result: "eventually got basic communication"

#############################

Isaac Gerg
-interface: B.Roadman BR3
----------
-car: 1996 Chevy Lumina
-pins on OBD plug: ???
-protocol: SAE-J1850(VPW)
-freediag version:
-result:

#############################

Steve Baker
-interface: X-Two (ELM323)
----------
-car: 2003 MINI Cooper S; 
-pins on OBD plug: 1,4,5,7,8,9,16.
-protocol: ISO1941_2
-freediag version: 0.3
-results: "Failed to clear fault code for loose filler cap - otherwise OK"
----------
-car: 2001 Mazda Protege 5;
-pins on OBD plug: ???
-protocol: ISO1941_2
-freediag version: 0.3
-results: "Worked OK"
----------
-car: 2003 Pontiac Grand Prix
-pins on OBD plug: ???
-protocol: ???
-freediag version: 0.3
-results: "No Communication (I think GM cars need VPW interfaces)"
----------
-car: 2003 MINI Cooper S; 
-pins on OBD plug: ???
-protocol: ISO1941_2
-freediag version: CVS dated 5/27/04.
-results: "Worked - albeit with MANY timeout warnings."

#############################

Ken Bantoft
-interface: ELM323
----------
-car: 2004 MINI Cooper S
-pins on OBD plug: ???
-protocol: ???
-freediag version: CVS
-result: "Nothing yet, still writing ELM323 driver"

#############################

Roy-Magne Mo
-interface: Multiplex Engineering T16-003
----------
-car: 99 Volvo V70R AWD
-pins on OBD plug: ???
-protocol: looks like ISO9141-2
-freediag version: 1.0.0
-result: "read the error codes once","interior lights flashed","got kb1=0x8 kb2=0x8".
----------
-car: 99 BMW 320i
-pins on OBD plug: ???
-protocol: ???
-freediag version: ???
-result: "failed".

#############################

Sagar Behere
-interface: SE9141/VAGTOOL compatible
----------
-car: Skoda Octavia
-pins on OBD plug: ???
-protocol: 9141-2
-freediag version: v0.3
-result: "can see throttle position, engine rpm etc"
----------
-car: Mahindra Scorpio
-pins on OBD plug: ???
-protocol: ISO 14230
-freediag version: v0.3 | 1.0
-result: "getting ECU connection to Scorpio"
----------
unable to connect to Scorpio AND skoda with 1.0

#############################

Dave Blune
-interface: B.Roadman BR2
----------
-car: 2001 Nissan Exterra
-pins on OBD plug: ???
-protocol: ???
-freediag version: ???
-result: ???

#############################

Vasco Nevoa
-interface: Andy Whittaker (VAGTOOL compatible)
----------
-car: 1998 Mercedes A140
-pins on OBD plug: 1,4,5,7,8,9,13,15,16.
-protocol: Expressly rejects ISO14230; connects fine with ISO9141.
-freediag version: 1.0.0
-result: always connects with slow ISO9141, but all subsequent data is lost (zeros)".
----------
-car: 1998 Ford Fiesta
-pins on OBD plug: 2,4,5,7,10,13,16.
-protocol: probably SAE-J1850(PWM). Incompatible with present interface+software.
-freediag version: 1.0 and 0.3
-result: Timeout in all protocols.

#############################