To install Tunerstein:

1) Create a directory named to suit your tastes, on any drive you choose.

2) Copy ALL of the files from the CDROM to this directory

3) Run SNJRT30.EXE to install and register the support DLL's


It will put some DLL files into the system directory and the register them. You must be logged on as adminstrator if you are running NT. DLL's are put under the windows/system32 directory by default. For Windows 95, you MUST install them into the /windows or /windows/system not system32 directory. 

Under some circumstances you will get the error "Can't open results file" at the end of program #1. Ignore this error.

Copy the snj2tntclib.dll to the same location as the previous dll's. 

If you run the programs and they do not load, run the included SNJ2REG.EXE as "SNJ2REG.EXE \windows\system\snj2tntclib.dll" then try again 

4) You can delete SNJRT30.EXE after step 3 is complete

5) To run the logger, click on "TunerLogger.exe", to run the player, click on "TunerPlayer.exe"

The file tnt.reg MUST be in the same directories as these two executables.

By default most loggable items are enabled for logging.  For the best possible performance, select only the ones you need after clicking "Enable Interface".

For help, please email support@tunerstein.com