|
PID name (definition)
|
Unit/Condition
|
Operation Condition (Reference)
|
Terminal
|
|
CCNT_RCM
(Number of continuous DTCs)
|
|
• DTCs detected: 1-255
• No DTCs detected: 0
|
|
|
D_ABAGR2
(Driver-side air bag module (inflator No.2) resistance)
|
Ohm
|
Under any condition: 1.5-3.7 ohms
|
1U, 1Q
|
|
DABAGR
(Driver-side air bag module (inflator No.1) resistance)
|
Ohm
|
Under any condition: 1.5-3.7 ohms
|
1I, 1M
|
|
DFCURTRES
(Driver-side curtain air bag module resistance)
|
Ohm
|
Under any condition: 1.4-3.2 ohms
|
2AG, 2AK
|
|
DR_BUKL
(Driver-side buckle switch status)
|
Buckled/
Unbuckled
|
• Driver-side buckle switch on: Buckled
• Driver-side buckle switch off: Unbuckled
|
2W
|
|
DR_PTENS
(Driver-side pre-tensioner front buckle resistance)
|
Ohm
|
Under any condition: 1.5-3.1 ohms
|
2J, 2N
|
|
DS_AB
(Driver-side side air bag module resistance)
|
Ohm
|
Under any condition: 1.4-3.2 ohms
|
2B, 2F
|
|
I_PAD_FLT
(PAD switch status)
|
OK/
Fault
|
• PAD switch normal: OK
• PAD switch abnormal: Fault
|
1P
|
|
I_PAD_SW
(PAD switch status)
|
ON/
OFF
|
• PAD switch is at PASS AIRBAG ON position: ON
• PAD switch is at PASS AIRBAG OFF position: OFF
|
1P
|
|
P_ABAGR2
(Passenger-side air bag module (inflator No.2) resistance)
|
Ohm
|
Under any condition: 1.4-2.9 ohms
|
1R, 1V
|
|
PABAGR
(Passenger-side air bag module (inflator No.1) resistance)
|
Ohm
|
Under any condition: 1.4-2.9 ohms
|
1J, 1N
|
|
PFCURTRES
(Passenger-side curtain air bag module resistance)
|
Ohm
|
Under any condition: 1.4-3.2 ohms
|
2AH, 2AL
|
|
PS_AB
(Passenger-side side air bag module resistance)
|
Ohm
|
Under any condition: 1.4-3.2 ohms
|
2I, 2M
|
|
PS_PTENS
(Passenger-side pre-tensioner front buckle resistance)
|
Ohm
|
Under any condition: 1.5-3.1 ohms
|
2A, 2E
|
|
VBATTRCM
(SAS control module input voltage)
|
V
|
• Ignition switch is at ON: B+
• Other: 0
|
1D
|