Yaw Rate/Lateral Acceleration Sensor Replacement (With VSA)

Yaw Rate/Lateral Acceleration Sensor Replacement

NOTE:

• Do not damage or drop the sensor as it is sensitive.
  
• Do not use an impact wrench.
  

1.	Remove the center console.

2.	Pull down the carpet.

3.	Disconnect the yaw rate/lateral acceleration sensor 4P connector (A).   9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)AB

4.	Remove the sensor mounting bolts, and remove the yaw rate/lateral acceleration sensor (B).

5.	Install in the reverse order of removal.