Power Mirror Actuator Test
Power Mirror Actuator Test
| 1. | Remove the door panel. |
| 2. | Disconnect the connector (A) from the power mirror actuator.
 Wire side offemale terminals*1:*2:*3:*1:With retractable power mirror With power mirror defogger*2:With retractable power mirror or power mirror defogger*3:Wire side of female terminalsWire side of female terminalsPower mirror onlyA |
| 3. | Check actuator operation by connecting power and ground according to the table. 10P CONNECTOR:  TerminalPosition89TILT UPTILT DOWNSWING LEFTSWING RIGHT76P CONNECTOR:  TerminalPosition56TILT UPTILT DOWNSWING LEFTSWING RIGHT43P CONNECTOR:  TerminalPosition23TILT UPTILT DOWNSWING LEFTSWING RIGHT1 |
| 4. | If the mirror fails to work properly, replace the mirror actuator. |
Defogger Test
| 5. | Check for continuity between the No. 4 and No. 10 terminals of the 10P connector, or between the No. 1 and No. 2 terminals of the 6P connector. There should be continuity. |
Retract Test
| 6. | Check actuator operation by connecting battery power and ground according to the table. 10P CONNECTOR:  TerminalPosition2 [3]3 [2]Mirrors retractsfrom extend position.Mirrors extends from retract position.[ ] : Right power mirror 6P CONNECTOR:  TerminalPosition1 [2]2 [1]Mirrors retractsfrom extend position.Mirrors extends from retract position.[ ] : Right power mirror |
| 7. | If the retract actuator fails to work properly, replace the mirror. |