Tailgate Spoiler Replacement

Tailgate Spoiler Replacement

For Some Models

NOTE:

• Take care not to scratch the body.
  
• When prying component, use the handy remover set or equivalent.
  

1.	Remove the tailgate spoiler (A): -1  Pry up at the knotch (B) of the lid (C), then remove the lids from both sides. -2  Remove the bolts. -3  Lift the spoiler up, then remove it.   ABCD: Bolt, 2Fastener Locations6 x 1.0 mm 9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)DA

2.	Install the spoiler in the reverse order of removal. When installing, three locating bolts (D) should be fully inserted into grommets on the tailgate.