CVT Speed Sensor Replacement (L12A/L13A CVT-KM/KP)
CVT Speed Sensor Replacement
| 1. | Remove the air cleaner housing and intake air duct. |
| 2. | Disconnect the CVT speed sensor connector.
 ABC6 x 1.0 mm12 N·m (1.2 kgf·m, 8.7 lbf·ft) |
| 3. | Remove the CVT speed sensor. |
| 4. | Install the new CVT speed sensor (C) with the new O-ring (B) and the sensor washer (A). When installing the sensor, do not allow dust or other foreign particles to enter the transmission. |
| 5. | Check the connector for rust, dirt, or oil, then connect the connector securely. |
| 6. | Install the air cleaner housing and intake air duct. |