Ceiling Light Test/Replacement
Ceiling Light Test/Replacement
| 1. | Turn the light switch OFF. |
| 2. | Carefully pry off the lens (A) with a small screwdriver.
 BC5 x 1.0 mmANot used |
| 3. | Remove the two mounting screws. |
| 4. | Disconnect the 3P connector (B) from the housing (C). |
| 5. | Check for continuity between the terminals in each switch position according to the table.
 TerminalPositionOFFONMIDDLE12Bodyground |
| 6. | Install the light in the reverse order of removal. |