Honda Jazz/Fit 2005 · Service Manual

Tailgate Handle Replacement

Tailgate Handle Replacement

NOTE: Put on gloves to protect your hands.

1.Remove the rear license trim.

2.Disconnect the tailgate opener cable (A) from the tailgate handle (B), and remove the nuts.

 

SAA2E00J18573958101KBAD01Fastener Locations: Nut, 2BA6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)

3.From outside of the tailgate, pull out the tailgate handle, then remove it.

4.Install the handle in the reverse order of removal, and note these items:

  • Make sure the tailgate opener cable is connected securely.
  • Make sure the tailgate opens properly.