Engine Oil/Air Separator Installation

1.	Clean and dry the oil/air separator mating surfaces, bolts and bolt holes.

2.	Apply a 1.5 mm wide bead of the liquid gasket, P/N 08C70-K0234M, 08C70-K0334M or 08C70-X0331S, along the broken line (A). NOTE: Do not install the parts if 5 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing old residue. A

3.	Install the oil/air separator. 6 x 1.0 mm 12 N·m (1.2 kgf·m, 8.7 lbf.ft)