Honda Jazz/Fit 2004 · Service Manual

Transmission Range Switch Test (CVT)

Transmission Range Switch Test

1.Remove the air cleaner housing and intake air duct.

2.Disconnect the transmission range switch connector.

 

SAA2J15E15110759811FEJD01

Connector Terminal Specifications
Connector Terminal Signal 
1 - 
2 [N] 
3 [S] 
4 ST 
5 - 
6 [P] 
7 [R] 
8 [D] 
9 [L] 
10 GND 

3.Check for continuity between terminals at the connector. There should be continuity between terminals in the following table for each switch position.

Transmission Range Switch Continuity check 

SAA2E02E15110759811FEAD01PositionTerminal12345678910[P][R][D][N][S][L]

4.If there is no continuity between any terminals, adjust the transmission range switch installations. If the transmission range switch installation is OK, replace the transmission range switch.