Radiator Fan Switch Replacement
Radiator Fan Switch Replacement
| 1. | Drain the engine coolant. |
| 2. | Remove the air cleaner housing. |
| 3. | Disconnect the radiator fan switch connector, then remove the radiator fan switch (A).
 A24 N·m (2.4 kgf·m, 17 lbf·ft)B |
| 4. | Install the radiator fan switch with a new O-ring (B). |
| 5. | Clean up any spilled engine coolant. |
| 6. | Install the air cleaner housing. |
| 7. | Refill the radiator with engine coolant, and bleed air from the cooling system with the heater valve open. |