Rocker Arms and Shaft Disassembly/Reassembly (L12A/L13A)

Rocker Arms and Shaft Disassembly/Reassembly

NOTE:

• Identify parts as they are removed to ensure reinstallation in original location.
  
• When disassembling or reassembling the rocker arms, remove or install the rocker arm from cam chain side on the rocker shaft.
  
• Inspect the rocker arm shaft and rocker arms.
  
• The rocker arms must be installed in the same positions if reused.
  
• Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact points.