Primary HO2S Replacement (Without ETCS)
Primary HO2S Replacement
| 1. | Disconnect the primary HO2S 4P connector (A), then remove the primary HO2S (B).
 AB44 N·m (4.5 kgf·m, 33 lbf·ft) |
| 2. | Install the primary HO2S in the reverse order of removal. |
| 1. | Disconnect the primary HO2S 4P connector (A), then remove the primary HO2S (B).
AB44 N·m (4.5 kgf·m, 33 lbf·ft) |
| 2. | Install the primary HO2S in the reverse order of removal. |