Honda Jazz/Fit 2003 · Service Manual

M/T Shift Lever Clearance Inspection (5MT)

M/T Shift Lever Clearance Inspection

1.Measure the clearance between shift lever (A) and the select lever (B) with a feeler gauge (C). If the clearance is more than the service limit, go to 2.

Standard: 0.05 - 0.35 mm (0.002 - 0.014 in.) 
Service Limit: 0.55 mm (0.022 in.) 

 

SAA2E01E34150339122MAAD01CAB

2.Measure the groove of the shift lever.

  • If distance is not within the standard, replace the shift lever with a new one.
  • If distance is within the standard, replace the select lever with a new one.

Standard: 13.00 - 13.15 mm (0.512 - 0.518 in.) 

 

SAA2E01E34150339122MAAD02