Driver's Dashboard Tray Removal/Installation

Driver's Dashboard Tray Removal/Installation

NOTE:

• Take care not to scratch the dashboard.
  
• Put on gloves to protect your hands.
  
• LHD is shown, RHD is symmetrical.
  

1.	Remove the dashboard.

2.	Remove screws, then remove the driver's heater duct (A).   Fastener Locations: Screw, 2A

3.	Remove the screws (A, B), then remove the driver's dashboard tray (D).   Fastener Locations: Screw, 2 (Black)AAB: Screw, 5 (Gold)BABBBBD

4.	Install the tray in the reverse order of removal.