Rear Door Latch Replacement
Rear Door Latch Replacement
NOTE: Put on gloves to protect your hands.| 1. | Raise the glass fully. |
| 2. | Remove these items: |
| 3. | Disconnect the lock rod (A) from the lock crank (B).
 BA |
| 4. | With Super Locking: Remove the bolts, then remove the harness protector (A).
 Fastener Locations: Bolt, 26 x 1.0 mm8 N·m (0.8 kgf·m, 6 lbf·ft)A |
| 5. | Disconnect (and detach) the actuator connector (A). Remove the screws securing the latch (B). Take care not to bend the inner handle rod (C) and lock rod (D).
 Fastener Locations: Screw, 36 x 1.0 mm5 N·m (0.5 kgf·m, 4 lbf·ft)BADWith Super Locking:Without Super Locking:C6 x 1.0 mm 5 N·m (0.5 kgf·m, 4 lbf·ft)BCDA |
| 6. | Disconnect the inner handle rod (A) and lock rod (B) from the latch (C).
 CAB |
| 7. | Remove the bolts (A, B) securing the rear lower channel (C), then remove the collar (D).
 Fastener LocationsA: Bolt, 1B6 x 1.0 mm 8 N·m (0.8 kgf·m, 6 lbf·ft)B: Bolt, 1A 6 x 1.0 mm 8 N·m (0.8 kgf·m, 6 lbf·ft)DC |
| 8. | Move the latch (A) through the gap between the rear lower channel (B) and door, then remove it.
 BA |
| 9. | Install the latch in the reverse order of removal, and note these items:
|