| Item |
Measurement |
Qualification |
Standard or New |
Service Limit |
| Input shaft |
Diameter of needle bearing contact area |
Flywheel side |
19.987-20.000 mm (0.7869-0.7874 in.) |
When worn or damaged |
| Forward clutch side |
19.987-20.000 mm (0.7869-0.7874 in.) |
When worn or damaged |
| Thrust clearance |
ATF pump driven sprocket hub |
0.37-0.65 mm (0.015-0.026 in.) |
- |
| Planetary carrier |
0.05-0.11 mm (0.002-0.0043 in.) |
- |
| Feed pipe O.D. |
Drive pulley feed pipe |
6.97-6.98 mm (0.274-0.275 in.) |
6.95 mm (0.274 in.) |
| Forward clutch feed pipe |
11.47-11.48 mm (0.4516-0.4520 in.) |
11.45 mm (0.451 in.) |
| Feed pipe bushing I.D. |
Drive pulley feed pipe |
7.00-7.015 mm (0.2756-0.2762 in.) |
7.030 mm (0.277 in.) |
| Forward clutch feed pipe |
11.5-11.518 mm (0.4528-0.4535 in.) |
11.533 mm (0.454 in.) |
| Sealing ring groove width |
|
2.00-2.10 mm (0.079-0.083 in.) |
2.105 mm (0.083 in.) |
| Thrust shim, 22 x 28 mm thickness (ATF pump driven sprocket hub) |
C |
1.15 mm (0.045 in.) |
When worn or damaged |
| D |
1.40 mm (0.055 in.) |
When worn or damaged |
| E |
1.65 mm (0.065 in.) |
When worn or damaged |
| F |
1.90 mm (0.075 in.) |
When worn or damaged |
| G |
2.15 mm (0.085 in.) |
When worn or damaged |
| H |
2.40 mm (0.095 in.) |
When worn or damaged |
| Thrust shim, 25 x 31 mm thickness (Planetary carrier) |
A |
1.050 mm (0.041 in.) |
When worn or damaged |
| B |
1.12 mm (0.044 in.) |
When worn or damaged |
| C |
1.19 mm (0.047 in.) |
When worn or damaged |
| D |
1.26 mm (0.050 in.) |
When worn or damaged |
| E |
1.33 mm (0.052 in.) |
When worn or damaged |
| F |
1.40 mm (0.055 in.) |
When worn or damaged |
| G |
1.47 mm (0.058 in.) |
When worn or damaged |
| H |
1.54 mm (0.061 in.) |
When worn or damaged |
| I |
1.61 mm (0.063 in.) |
When worn or damaged |
| J |
1.68 mm (0.066 in.) |
When worn or damaged |
| K |
1.75 mm (0.069 in.) |
When worn or damaged |
| L |
1.82 mm (0.072 in.) |
When worn or damaged |
| M |
1.085 mm (0.0427 in.) |
When worn or damaged |
| N |
1.155 mm (0.0454 in.) |
When worn or damaged |
| O |
1.225 mm (0.0482 in.) |
When worn or damaged |
| P |
1.295 mm (0.0510 in.) |
When worn or damaged |
| Q |
1.365 mm (0.0537 in.) |
When worn or damaged |
| R |
1.435 mm (0.0565 in.) |
When worn or damaged |
| S |
1.505 mm (0.0593 in.) |
When worn or damaged |
| T |
1.575 mm (0.0620 in.) |
When worn or damaged |
| U |
1.645 mm (0.0648 in.) |
When worn or damaged |
| V |
1.715 mm (0.0675 in.) |
When worn or damaged |
| W |
1.785 mm (0.0703 in.) |
When worn or damaged |
