Plastic Parts Paint
|
6-12 | ||||||
| Standard Symbol | Name | Heat Resistance Temperature °C (°F) | Solvent Resistance | Note | ||
| PP | Polypropylene | 80
(176) |
Alcohol and gasoline are acceptable. | Solvent is not recommended. | ||
| PPO
(PPE) |
Polyphenylene oxide | 100
(212) |
A small amount of alcohol is acceptable for a short time. | Soaking with an organic solvent such as gasoline and alcohol is not recommended. | ||
| PS | Polystyrene | 60
(140) |
A small amount of alcohol is acceptable for a short time. | Soaking with an organic solvent such as gasoline and alcohol is not recommended. | ||
| PUR | Polyurethane | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. | ||
| PVC | Polyvinylchloride | 80
(176) |
A small amount of alcohol and gasoline are acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. | ||
| SAN | Styrene acrylonitrile | 80
(176) |
Wiping alcohol off in a short time can be allowed. | Soaking with an organic solvent such as gasoline and alcohol is not recommended. | ||
| SMC | Sheet moulding compound | 180
(356) |
Alcohol and gasoline are acceptable. | Solvent is not recommended. | ||
| TPE | Thermoplastic polyester elastomer | 80
(176) |
Alcohol is acceptable and wiping gasoline for a short time can be allowed. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. Wash remover off with water thoroughly. | ||
| TPS | Thermoplastic styrene elastomer | 80
(176) |
A small amount of alcohol and gasoline are acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. Wash remover off with water thoroughly. | ||
| TPO | Thermoplastic olefin / elastomer | 80
(176) |
Alcohol is acceptable and wiping gasoline for a short time can be allowed. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. Wash remover off with water thoroughly. | ||
| TPU | Thermoplastic / urethane / elastomer | 80
(176) |
A small amount of alcohol and gasoline are acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. Wash remover off with water thoroughly. | ||
| UP | Polyester | 110
(230) |
Alcohol and gasoline are acceptable. | Alkali is not recommended. | ||