Plastic Parts Paint
|
6-11 |
| Standard Symbol | Name | Heat Resistance Temperature °C (°F) | Solvent Resistance | Note |
| AAS | Acrylonitrile acrylic styrene | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | An organic solvent such as gasoline is not recommended.
An aroma product is not recommended. |
| ABS | Acrylonitrile butadiene styrene | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | An organic solvent such as gasoline is not recommended.
An aroma product is not recommended. |
| AES | Acrylonitrile ethylene styrene | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | An organic solvent such as gasoline is not recommended.
An aroma product is not recommended. |
| A/EPDM/S | Acrylonitrile / ethylene propylene diene rubber / styrene | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | An organic solvent such as gasoline is not recommended.
An aroma product is not recommended. |
| ASA | Acrylonitrile styrene acrylate | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | An organic solvent such as gasoline is not recommended.
An aroma product is not recommended. |
| CAB | Cellulose acetate butylate | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | An organic solvent such as gasoline is not recommended.
An aroma product is not recommended. |
| E/VAC | Ethylene-vinyl acetate | 80
(176) |
A small amount of alcohol and gasoline are acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol is not recommended. |
| PA | Polyamide | 80
(176) |
Alcohol and gasoline are acceptable. | Battery acid (sulphuric acid) is not recommended. |
| PBT | Polybutylene terephtalate | 160
(320) |
Alcohol and gasoline are acceptable. | Solvent is not recommended. |
| PC | Polycarbonate plastics | 120
(248) |
A small amount of alcohol is acceptable for a short time. | Brake fluid, and wax and grease remover not recommended. |
| PE | Polyethylene | 80
(176) |
Alcohol and gasoline are acceptable. | Solvent is not recommended. |
| PF | Phenol formaldehyde | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol, is not recommended. |
| PMMA | Polymethyl methacrylate | 80
(176) |
A small amount of alcohol is acceptable for a short time. (Degreasing) | Soaking with an organic solvent such as gasoline and alcohol, is not recommended. Wash remover off with water thoroughly. |
| POM | Polyoxymethylene polyacetal | 100
(212) |
Alcohol and gasoline are acceptable. | Solvent is not recommended. |