BULKHEAD UPPER FRAME BULKHEAD SIDE WHEELHOUSE UPPER EXTENSION FRONT WHEELHOUSE FRONT SIDE FRAME BULKHEAD SIDE STAY FRONT LOWER CROSS-MEMBER

Set the new front bulkhead into position and measure the front compartment diagonally. Check the body dimension (see section 4). Tack weld the clamped position. Temporarily install the hood, front fender, headlight and front bumper and check for differences in level and clearance. Perform the main welding: BULKHEAD UPPER FRAME WHEELHOUSE UPPER EXTENSION WHEELHOUSE UPPER MEMBER BULKHEAD SIDE FRONT SIDE FRAME FRONT LOWER CROSS-MEMBER FRONT WHEELHOUSE BULKHEAD SIDE STAY FRONT SIDE FRAME