General Information

Type and Materials of Exterior Plastic Parts

 1-26  

NOTE: A standard symbol is stamped on the underside of each resin part to show the type of material of used.

Example:

  1. FRONT WINDSHIELD MOULDING

    Acrylonitrile ethylene propylene dine rubber styrene (A/EPDM/S)

  2. DOOR OUTER HANDLE

    Polycarbonate (PC)

  3. DOOR MIRROR

    Painted: Acrylonitrile butadiene styrene (ABS)

    Unpainted: Acrylonitrile styrene acrylate (ASA)

  4. ROOF MOULDING

    Polyvinyl chloride (PVC)

  5. LICENSE TRIP

    Acrylonitrile butadiene styrene (ABS)

  6. REAR BUMPER

    Polypropylene (PP)

  7. DOOR SASH TRIM

    Acrylontrile ethylene propylene dinene rubber styrene (A/EPDM/S)

  8. FRONT BUMPER

    Polypropylene (PP)