|
This manual covers the repairs of 2001 model series CIVIC that have been involved in an accident and it describes the work related to the replacement of damage body parts. Please read through instructions and familiarise yourself with them before actually using this manual. NOTE: Refer to the 2001 CIVIC Shop Manual (P/N. 60S5A00) for specifications, wire harness locations, safety stand support points, etc.
|
Special Information
|
WARNING
Indicates a strong possibility of server Personal Injury or death if instructions are not followed.
|
|
CAUTION
Indicates a possibility of personal injury or equipment damage if instructions are not followed.
|
NOTE: Gives helpful information.
|
CAUTION
Detailed description of standard workshop procedures, safety principles and service operations are not included. Please note that this manual does contain warnings and caution against some specific service methods which could cause PERSONAL INJURY, damage a vehicle, or make it unsafe. Please understand that these warning cannot cover all conceivable ways in which service, whether or not recommended by Honda, might be done or of the possible hazardous consequences of each conceivable way, nor could Honda investigate all such ways. Anyone using service procedures or tools, whether or not recommended by Honda, must satisfy himself thoroughly that neither personal safety or vehicle safety will be jeopardised.
|
All information contained in this manual is based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. No part of this publication may be reproduced, stored in retrieval system, or transmitted, in any form by an means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. This included text, figures and tables.
| Fist Edition 8/2000 |
192 pages |
HONDA MOTOR CO., LTD. |
| All Rights Reserved |
Service Publication Office |
Sections with * include SRS components; Special Caution is required when servicing.
| |
1 General Info
2 Preparation of work
3 *Replacement
4 Body Dimensional Drawings
5 Rust Prevention
6 Paints
|