Intake Manifold and Exhaust System

Exhaust Pipe and Muffler Replacement

 9-9  

NOTE: Use new gaskets and self-locking nuts when reassembling.
  1. GASKET

    Replace.

  2. SELF-LOCKING NUT

    10 x 1.25 mm

    54 Nm (5.5 kgf/m, 40 lbf/ft)

    Replace.

  3. MUFFLER
  4. HEAT SHIELD
  5. 6 x 1.0 mm

    9.8 Nm (1.0 kgf/m, 7.2 lbf/ft)

  6. EXHAUST PIPE B
  7. GASKET

    Replace.

  8. THREE WAY CATALYTIC CONVERTER (TWC)
  9. GASKET

    Replace.

  10. SELF-LOCKING NUT

    10 x 1.25 mm

    33 Nm (3.4 kgf/m, 25 lbf/ft)

    Replace.

  11. SELF-LOCKING NUT

    8 x 1.25 mm

    18 Nm (1.8 kgf/m, 13 lbf/ft)

    Replace.

  12. SELF-LOCKING NUT

    10 x 1.25 mm

    33 Nm (3.4 kgf/m, 25 lbf/ft)

    Replace.

  13. SELF-LOCKING NUT

    10 x 1.25 mm

    54 Nm (5.5 kgf/m, 40 lbf/ft)

    Replace.

  14. EXHAUST PIPE A
  15. GASKET

    Replace.

  16. 8 x 1.25 mm

    22 Nm (2.2 kgf/m, 16 lbf/ft)

  17. SELF-LOCKING NUT

    10 x 1.25 mm

    33 Nm (3.4 kgf/m, 25 lbf/ft)

    Replace.

aaa