- Align the pin on the crankshaft pulley upward of the cylinder block.
- Use M8 bolt to lock the fuel supply pump pulley to cylinder block to align the pump phase.
- Use M6 bolt to lock the camshaft pulley on the camshaft carrier through the camshaft lock hole (A).
- Move the belt tensioner counterclockwise and tighten to 4.9 Nm temporally.
- Install the timing belt with correct routing.
- Loose the bolt: tension pulley slowly and touch it to timing belt gently.
- After making balance between the timing belt and belt tensioner bolt: tension pulley with specified torque.
(use suitable tool to prevent movement of the tension pulley).
Specified torque: 49 Nm (5.0 kgf/m, 36.2 lbf/ft)
- Turn the crankshaft pulley two turns clockwise