Position the engine under the vehicle. Attach the chain hoist to the engine, then lift the engine into position in the vehicle. Reinstall the mounting bolts/support nuts in the sequence given. Failure to follow this sequence may cause excessive noise and vibration and reduce bushing life. Install the sub-frame (A). Align the reference lines (B) on the sub-frame with the bolt head centre, then tighten the bolts. 10 x 1.25 mm 59 Nm (6.0 kgf/m, 43 lbf/ft) 14 x 1.5 mm 103 Nm (10.5 kgf/m, 76 lbf/ft) Replace.

Tighten the front mount mounting bolt. 12 x 1.25 mm 64 Nm (6.5 kgf/m, 47 lbf/ft) Replace. Tighten the rear mount mounting bolts. 10 x 1.25 mm 59 Nm (6.0 kgf/m, 43 lbf/ft) aaa