Fuel and Emissions Systems

DTC Troubleshooting Index (cont'd)

 11-8  

DTC Indicate Lamp Detection Item Page
Scan tool DTC Honda DTC MIL (Check Engine Lamp) Glow Lamp
P1535 - On On Incorrect Main Relay Performance (Switches off too early) (see page 11-124)
P1536 - On On Incorrect Main Relay Performance (Switches off too late) (see page 11-125)
P1550 - On On Brake SW Signal Correlation Error (After Restart Memory) (see page 11-127)
P1551 - On On Brake SW Signal Correlation Error (see page 11-129)
P1610 - On - EEPROM Communication Error (see page 11-130)
P1611 - On - EEPROM Write Error (see page 11-131)
P1612 - On On Gate Array Quantity Stop (see page 11-131)
P1613 - On On Gate Array Communication (see page 11-132)
P1614 - On On Injector drive Circuit Voltage Too High (see page 11-133)
P1615 - On On Injector drive Circuit Voltage Too Low (see page 11-134)
P1616 - On On RAM Performance (see page 11-135)
P1617 - On On ECM Internal Ground Connection Error (see page 11-135)
P1618 - On On Reference #1 And #2 Circuit Low/High Voltage

(APS1, APS2, RP, MAP, MAF sensor)

 (see page 11-136)
P1619 - On On Injector driver Circuit Shut Off Error (Error at shut off via zero quantity) (see page 11-137)
P1620 - On On Injector driver Circuit Shut Off Error (Error at shut off via injector power stage (OFF)) (see page 11-138)
P1621 - On On Shut Off Error (5 V power supply Circuit Low, stabiliser limit exceeded) (see page 11-139)
P1622 - On On Shut Off Error (5 V power supply Circuit High, stabiliser limit exceeded) (see page 11-140)
P1623 - On On Ignition Switch Circuit Low (see page 11-141)
P1625 - On On Reference #1 Circuit Low Voltage

(APS1, MAF sensor)

 (see page 11-142)
P1626 - On On Reference #1 Circuit High Voltage

(APS1, MAF sensor)

 (see page 11-143)
P1627 - On On Reference #2 Circuit Low Voltage

(APS2, RP sensor, MAP sensor)

 (see page 11-144)
P1628 - On On Reference #2 Circuit High Voltage

(APS2, RP sensor, MAP sensor)

 (see page 11-145)

aaa