DTC P1628: Reference #2 Circuit High Voltage (APS2, MAP Sensor, RP Sensor)
- Check the ''On Board Diagnostic (OBD) System Check''.
Was the OBD System Check performed?
YES – Go to step 2.
NO – Go to OBD System Check. 
- Check the ECM ground circuit.
Was a problem found?
YES – Repair the ECM ground circuit.
NO – Substitute a known-good ECM and recheck. If symptom/indication goes away, replace the original ECM.
| NOTICE |
The battery power supply short circuit to 5 V power supply damages the ECM.